Orton

Orton Self-Supporting Cones, Cone 03, Pkg of 50

Name: Orton Self-Supporting Cones, Cone 03, Pkg of 50
Brand: Orton
SKU: B077MJGJ8W

Orton cone 03 pyrometric cones that bend near 2014°F, used on a shelf or in a sitter to check that a firing reached temperature.

Best for Checking low-fire and bisque firings

Opens the product page with today’s price, sizes and delivery. We may earn a commission at no extra cost to you.

Specifications

Max cone	03
Bending temp	approximate temperature of 2014° F
Count	Pkg/50
Size	1-1/8" long x 1/4" wide

As stated by the maker or seller. Specs can change between batches and sellers; confirm on the listing.

The number of this cone is 03 which bends at an approximate temperature of 2014° F, depending on firing conditions.
These SRB03 pyrometric cones measure 1-1/8" long x 1/4" wide and are made to sit on a shelf inside a kiln or in a kiln sitter to determine when a firing is complete, if the kiln provided enough heat or if there was a problem during the…
Orton cones are made from carefully controlled compositions so that they bend in a repeatable manner over a very small temperature range.
When used in a cone holder or sitter, the cone tip sags until it reaches a point level with the base indicating the kiln has properly fired.
Cones have been used in ceramic firings for more than 130 years and Orton has the history and experience to provide the very best product.
Orton has been manufacturing these cones in the USA since 1896.